BECCA RE-NU Performance
New or Used… RE-NU™ your Spray Gun to Like New Performance!
The Four-Step Process
RE-NU™ is a process designed to restore the performance of any spray gun. The polish will remove/reduce micro inclusions from the surface. This will provide less friction and turbulence in the flow of fluid and air to maximize performance. The system works with any material but works exceptional with metal surfaces. The system is a four Step process. We will review each step to assure success.
Step One: Tear Down
Tear down the spray gun completely. This includes air and fluid passageways.
Step Two: Detail Cleaning of the Spray Gun
The spray gun should be completely dis-assembled (particularly the first time) to assure removal of all residues.
We recommend the use of:
Waterborne Coatings: Acetone mixed w/ Aircraft Stripper 10:1 Ratio
Other Coatings: Solvent of choice mixed w/ Aircraft Stripper 10:1 Ratio
Clean all parts including Air passageways.
Step Three: RE-NU Polish
Apply RE-NU Polish to all surfaces of the spray gun and its parts. Make sure to focus on the needle tip area (Only do a section at a time. Do not let polish dry completely). We have supplied a special application brush to polish the inside passageway of the fluid tip. Polish… Wipe/ rinse the brush…Repeat this process 2-3 times. Remove the polish residues with the supplied micro-Fiber Cloth and Buffing Pad.
Step Four: EZ Release Spray (for Waterborne & Solvent)
Apply EZ-Release w/ Micro-Film coating to all surfaces including air and fluid passageways. The micro-film coating is PH neutral and will minimize corrosion and will prevent paint from adhering to the surface. Re-apply after cleaning the spray gun during normal production.
Note: Those with BECCA Waterborne Spray Gun Cleaners do not need to reapply since the Micro-Film technology is in WaterWave™
RE-NU™ is a process designed to restore the performance of any spray gun. The polish will remove/reduce micro inclusions from the surface. This will provide less friction and turbulence in the flow of fluid and air to maximize performance. The system works with any material but works exceptional with metal surfaces.
- No Fish Eye
- Simple 4 Step Process
- Use Recommended Every 3 – 6 Months
Waterborne Cleaning Solution Concentrate with MicroFilm Technology
- Highly Active with Heated Cleaning Systems
- Leaves MicroFilm – making next cleaning easier
- PH Neutralizer
- Phosphate Free
- Flexible – Can be Used with any Brand of Spray Gun Cleaner
- (1) 8oz Bottle per 5 Gal of Water